COREX is a Korean-engineered range of professional-grade nano coatings built on a
single idea: protection should be structural, not cosmetic. A COREX layer bonds to
the paint and becomes part of it — a hard, transparent shell that holds gloss,
sheds water and takes the daily punishment instead of your clear coat.
Three products, one philosophy. Ceramic for the foundation, Graphene for the car
that lives outdoors, Borophene for the car you intend to keep. Every application is
registered against a verifiable E-Warranty, so the cover is a record, not a promise.
Made in Korea
Manufactured to professional detailing standards, not repackaged retail chemistry.
Registered E-Warranty
Every application gets a certificate with a unique ID, verifiable online for the full term.
Professional application only
Preparation is most of the result, so COREX is applied by trained installers.
The range
Three tiers of protection
The same nano-coating philosophy at three levels of hardness, slickness and
cover. Every one is 50 ml, professional grade, and registered against an
E-Warranty.
10H
01 / 03
COREX Ceramic
Advanced Nano Ceramic Coating
The foundation of the range. A true nano-ceramic layer that locks in gloss, repels water and shrugs off road grime — the right choice for a daily-driven car that gets washed at home.
10H Hardness50 mlProfessional GradeMade in Korea
10H hardness for maximum scratch resistance
Extreme hydrophobic effect — water beads and rolls off
High gloss with a mirror-like finish
UV and oxidation resistance
Resists chemicals, acids and road grime
Anti-yellowing over the life of the coating
Easy maintenance — dirt struggles to key onto the surface
Technology
Nano ceramic (SiO₂)
Hardness
10H
Hydrophobicity
High
Gloss
High gloss
Flash time
3–4 min
Volume
50 ml
Paint
Metal
Glass
Bike
MRP
₹14,000incl. of all taxes
Net quantity
50 ml
Pack contents
1 × 50 ml Ceramic bottle, applicator duster, microfiber cloth
Country of origin
South Korea
Imported & marketed by
Abrasive Solution Enterprises
Manufactured by
CNS Tech Inc. 213, Sicheong-ro, Giheung-gu, Yongin-si, Gyeonggi-do, South Korea
Mfg. date & best before
Printed on the pack
MRP is for the product only. Application charges are set by your
installer and vary with the vehicle and its condition.
Graphene reduces water spotting and holds its slickness longer than ceramic alone. The middle of the range, and the sensible pick for a car that lives outdoors.
10H Hardness50 mlProfessional GradeMade in Korea
10H hardness for maximum scratch resistance
Extreme hydrophobic effect with reduced water spotting
High gloss with a mirror-like finish
UV and oxidation resistance
Resists chemicals, acids and road grime
Improved heat dissipation across the paint surface
Longer-lasting slickness than ceramic alone
Easy maintenance
Technology
Nano graphene
Hardness
10H
Hydrophobicity
Very high
Gloss
Deeper gloss
Flash time
3–4 min
Volume
50 ml
Paint
Metal
Glass
Bike
MRP
₹16,200incl. of all taxes
Net quantity
50 ml
Pack contents
1 × 50 ml Graphene bottle, applicator duster, microfiber cloth
Country of origin
South Korea
Imported & marketed by
Abrasive Solution Enterprises
Manufactured by
CNS Tech Inc. 213, Sicheong-ro, Giheung-gu, Yongin-si, Gyeonggi-do, South Korea
Mfg. date & best before
Printed on the pack
MRP is for the product only. Application charges are set by your
installer and vary with the vehicle and its condition.
The flagship. The hardest, slickest and longest-covered layer in the range, and the shortest flash time of the three — a professional-grade finish for a car you intend to keep.
10H+ Hardness50 mlProfessional GradeMade in Korea
10H+ hardness for maximum scratch resistance
Extreme hydrophobic effect — the slickest surface in the range
High gloss with a mirror-like finish
UV and oxidation resistance
Resists chemicals, acids and road grime
Fastest flash time — 1–2 minutes before levelling
Longest protection window in the COREX range
Easy maintenance
Technology
Nano borophene
Hardness
10H+
Hydrophobicity
Extreme
Gloss
Maximum gloss
Flash time
1–2 min
Volume
50 ml
Paint
Metal
Glass
Bike
MRP
₹19,100incl. of all taxes
Net quantity
50 ml
Pack contents
1 × 50 ml Borophene bottle, applicator duster, microfiber cloth
Country of origin
South Korea
Imported & marketed by
Abrasive Solution Enterprises
Manufactured by
CNS Tech Inc. 213, Sicheong-ro, Giheung-gu, Yongin-si, Gyeonggi-do, South Korea
Mfg. date & best before
Printed on the pack
MRP is for the product only. Application charges are set by your
installer and vary with the vehicle and its condition.
* Hardness figures are as stated in COREX product documentation.
Range comparison
Which coating fits your car?
COREX range comparison. Hardness figures are as stated in COREX product documentation.
Specification
COREX Ceramic 10H
COREX Graphene 10H
COREX Borophene 10H+
Technology
Nano ceramic (SiO₂)
Nano graphene
Nano borophene
Hardness
10H
10H
10H+
Hydrophobicity
High
Very high
Extreme
Gloss
High gloss
Deeper gloss
Maximum gloss
Protection tier
Essential
Advanced
Flagship
Flash time
3–4 min
3–4 min
1–2 min
Warranty
3 Years
4 Years
5 Years
Volume
50 ml
50 ml
50 ml
MRP incl. taxes
₹14,000
₹16,200
₹19,100
COREX Ceramic 10H
Technology
Nano ceramic (SiO₂)
Hardness
10H
Hydrophobicity
High
Gloss
High gloss
Protection tier
Essential
Flash time
3–4 min
Warranty
3 Years
Volume
50 ml
MRP
₹14,000incl. all taxes
COREX Graphene 10H
Technology
Nano graphene
Hardness
10H
Hydrophobicity
Very high
Gloss
Deeper gloss
Protection tier
Advanced
Flash time
3–4 min
Warranty
4 Years
Volume
50 ml
MRP
₹16,200incl. all taxes
COREX Borophene 10H+
Technology
Nano borophene
Hardness
10H+
Hydrophobicity
Extreme
Gloss
Maximum gloss
Protection tier
Flagship
Flash time
1–2 min
Warranty
5 Years
Volume
50 ml
MRP
₹19,100incl. all taxes
See the difference
Coated versus uncoated
Uncoated paint lets water sheet out and sit. A COREX surface forces it into tight beads
that carry dirt away as they roll off. Drag the handle to compare.
UncoatedCOREX coated
Application
Five steps, done properly
COREX is a professional system. The preparation decides the result — a coating applied
over contaminated paint locks the defects in for years.
1
Prepare
Wash, decontaminate and clay the paint, then correct any swirls. The coating locks in whatever is underneath it, so this step decides the final result.
2
Apply
Working panel by panel in a shaded, dust-free bay, apply evenly with the supplied applicator in overlapping cross-hatch passes.
3
Flash
Let the coating flash before levelling — 3–4 minutes for Ceramic and Graphene, 1–2 minutes for Borophene. Watch the surface, not the clock.
4
Level & Buff
Level with a clean microfibre as the rainbow sheen appears, then buff to a clear, streak-free finish with a second dry cloth.
5
Cure
Keep the vehicle dry and indoors while the coating hardens. Full cure continues over the following days as the layer cross-links.
Do not wash the vehicle for 7 days after application
The coating continues to cross-link during this period. Washing it early can leave
permanent marks in the layer and will invalidate warranty cover for that damage.
E-Warranty
Verify a warranty
Enter the Warranty ID printed on your certificate, or scan its QR code. Add your
registered mobile number for an extra check.
What you are covered for
Warranty coverage
Covered
Coating performance for the full warranted term
Hydrophobic performance — water beading and sheeting
Gloss retention across the coated surface
Resistance to environmental contamination
UV exposure and general weathering
Chemical resistance within the stated limits
Defects arising from the application itself
Not covered
Scratches, stone chips and accident damage
Swirl marks caused by improper washing technique
Pre-existing paint defects, or any repainting
Bird droppings and tree sap left untreated on the surface
Mineral water spots from hard water
Damage from harsh or non-approved chemicals
Damage from automatic car washes with abrasive brushes
Neglect and poor maintenance
Clear coat failure or damage
Unapproved bodywork or panel repairs after application
Your responsibilities
Cover remains valid only while these conditions are met.
Maintain the vehicle in line with COREX instructions
Use only pH-neutral, COREX-approved washing products
Do not wash the vehicle for 7 days after application
Present the vehicle for periodic inspection as advised by your installer
Keep your Warranty ID — it is required to make a claim
What owners say
Trusted on Indian roads
Booked the Graphene coating before the monsoon. Four months of Mumbai rain later and the water still rolls straight off — I have washed the car maybe twice since.
Rohan MehtaHyundai Creta
The gloss is the part I did not expect. Under showroom lights the black looks wet. Swirl marks from the old automatic wash are gone completely.
Priya NairHonda City
Application took most of a day, which I was not prepared for, but the finish justified it. Bird droppings and tree sap wipe off now instead of staining.
Amit DeshpandeMahindra XUV700
What sold me was the e-warranty. Scanned the QR on the certificate and my five-year cover came up straight away with the expiry date on it. No paperwork to lose.
Sandeep RathoreTata Harrier
Did the Ceramic on my wife's hatchback first to test it, then brought in the sedan a month later. Dust simply does not stick the way it used to.
Vikram ShahMaruti Suzuki Baleno
Partner with us
Dealer & distributor enquiries
COREX is expanding its installer network across India. If you run a detailing
studio, an accessories business or a workshop, we would like to hear from you.
Professional-grade product
Korean manufacture, three tiers, consistent chemistry batch to batch.
E-Warranty system included
Issue verifiable certificates to your customers in under a minute.
Territory support
Pricing, training and marketing material for your region.
Questions
Frequently asked
A ceramic coating is a liquid polymer that chemically bonds to your paint and cures into a hard, transparent layer. Wax sits on top of the paint and washes away in weeks. A coating becomes part of the surface and stays there for years, holding gloss and repelling water the whole time.
They are three tiers of the same idea. Ceramic 10H is the foundation — hard, glossy and hydrophobic, with a 3-year warranty. Graphene 10H adds better heat dissipation and noticeably less water spotting, with a 4-year warranty. Borophene 10H+ is the flagship: the hardest and slickest layer in the range, the fastest to flash, and covered for 5 years.
The warranty term is 3, 4 or 5 years depending on the product. Real-world life depends heavily on how the car is washed and where it is parked. A garaged car washed correctly with pH-neutral products will comfortably reach its term; a car left under trees and run through brush washes will not.
No. Do not wash the vehicle for 7 days after application. The coating is still cross-linking during that period, and washing it early can leave permanent marks in the layer.
Use the two-bucket method with a pH-neutral, COREX-approved shampoo and a clean microfibre mitt. Dry with a plush microfibre towel or filtered air. Avoid automatic car washes with abrasive brushes — they will scour swirl marks into any surface, coated or not.
No, and nobody's coating does. A 10H layer significantly improves resistance to light scratching, swirl marks and wash marring. It will not stop stone chips, key scratches or accident damage, and those are excluded from the warranty.
